The most efficient method of supporting stonework is normally for individual corbel supports to be positioned at the vertical joint between two adjacent stones.
CFA/S Corbel Angles
These are individual angles that accommodate a fixing bolt in the vertical leg. The dimensions are chosen to suit the application. The angles can also be supplied with a lip or dowels to restrain the base of each stone (Ref CFA/SL or CFA/SD).
CFA S with YPB
CFA SD
CFA/SC Corbel Angles
These are similar to the CFA/S, but the bottom leg is inclined at 15° to provide restraint where the support has to be positioned above the base of the stone. Ancon Corbel Angles are designed to suit each application.
Ancon MDC/S System
Ancon MDC/S Stonework Supports are based on the MDC masonry support system. The bracket height and depth are varied to suit the cavity size and the loadings. The dimensions of the angle are selected to suit the stonework to be supported.
Variations of the Ancon MDC/S
MDC/SD has a dowel to restrain the base of each stone MDC/SC has the bottom leg of the angle inclined at 15° to provide restraint where the support has to be positioned above the base of the stone.
Stonework supports may be specified as follows:
MDC / type / cavity / stone width / load
e.g. MDC / SD / 100 / 50 / 4
SSB Brackets
The Ancon SSB Bracket supports and restrains stonework with a facing thickness of between 25mm and 40mm. They can be positioned in either the vertical or the horizontal joints and allow adjustment without the need for shims.
ASB Adjustable Bracket
The ASB is an adjustable bracket for the support of thin stone and rain-screen cladding. It offers exceptional capacity for adjustment without cutting on-site, allowing rapid and accurate installation of stone panels.
.jpg)
.JPG)
