The Ancon 500 is a high performance tension system. It is available in various diameters from 8mm to 42mm in both carbon steel and stainless steel.
All components of the system can be supplied in a variety of finishes to provide corrosion resistance and to meet the demanding aesthetic requirements of many architectural applications. The bar used in this system has a minimum yield of 500MPa.
Ancon 500 System - Stainless Steel
THREAD SIZE
8
10
12
16
20
24
30
36
42
Failure Loads (kN)
22.5
37.5
54.5
102
159
229
364
531
728
Yield Loads (kN)
17
29
42
71
110
156
247
408
551
Design Cpcty. (kN)
18
30
43
81
127
183
291
424
582
Ancon 500 System - Carbon Steel
THREAD SIZE
8
10
12
16
20
24
30
36
42
Failure Loads (kN)
22.5
37.5
54.5
102
159
229
364
531
728
Yield Loads (kN)
17
29
42
71
110
156
247
408
551
Design Cpcty. (kN)
18
30
43
81
127
183
291
424
582
Surface finish is usually an important factor in applications using stainless steel. Ancon bars are bright drawn as standard but can be hand polished if required. The stainless steel forks and locking nuts can be supplied electro-polished, satin-polished or hand polished.
Isolation System
Isolation material is supplied as standard with the stainless steel system to enable its fixing to a connecting plate of a dissimilar metal. Each stainless steel fork connector is supplied with two clear, self-adhesive, PET (polyester) washers to be applied around the fixing hole either side of the structure. Stainless steel pins feature a PTFE coating around the barrel.
